WGN
Frame size
Go to Tec Data FinderUse our Tec Data Finder (TDF) to configure your gearbox and request a quote if necessary
Our WGN is the right-angle hollow shaft gearbox that operates particularly quietly. At the same time, the hypoid gearing increases the quality of the surface of your workpiece. With a shrink disc, it can be connected directly to the application - this is uncomplicated, safe and opens up new design possibilities.
Features
-
Precision Line
-
Right angle gearbox
-
Hypoid gear right angle stage
-
Preloaded tapered roller bearings
-
Radial shaft seal
-
Square type output flange
-
Counterdirectional rotation
Further Information
| WGN 070 | WGN 090 | WGN 115 | WGN 142 | |||
|---|---|---|---|---|---|---|
| Ratios | 4, 5, 7, 8, 10 4, 5, 7, 8, 10 | |||||
| Efficiency | η | % % | 95 95 | |||
| Min. operating temperature / Max. operating temperature | Tmin / Tmax | °C °F | -25 / 90 -13 / 194 | |||
| Protection class | IP65 IP65 | |||||
| Standard backlash | φ | arcmin arcmin | <5 <5 | <5 <5 | <5 <5 | <5 <5 |
| Torsional stiffness | C2t | Nm /arcmin lbf.in/arcmin | 1.6 - 2.2 14 - 19 | 4.2 - 5.7 37 - 50 | 9.2 - 12.4 81 - 110 | 23.5 - 31.5 208 - 279 |
| Gearbox weight | m | kg lbm | 3.2 7.1 | 5.1 - 5.5 11.2 - 12.2 | 10.7 - 10.8 23.7 - 23.8 | 22.9 - 23.5 50.6 - 51.8 |
| Running noise | LpA | dB(A) dB(A) | 66 66 | 67 67 | 68 68 | 70 70 |
| WGN 070 | WGN 090 | WGN 115 | WGN 142 | |||
|---|---|---|---|---|---|---|
| Maximum radial force | Fr max | N lbf | 2700 607 | 4000 899 | 6500 1461 | 10000 2248 |
| Maximum axial force | Fa max | N lbf | 3400 764 | 4500 1012 | 6500 1461 | 12000 2698 |
| Maximum tilting moment | MK max | Nm lbf.in | 253 2235 | 442 3912 | 970 8586 | 1505 13320 |
| WGN 070 | WGN 090 | WGN 115 | WGN 142 | |||
|---|---|---|---|---|---|---|
| Mass moment of inertia input | J1 | kgcm2 lbf.in.s210-4 | 0.502 - 0.834 4.443 - 7.382 | 1.018 - 1.417 9.010 - 12.542 | 4.805 - 6.111 42.528 - 54.087 | 12.934 - 18.905 114.476 - 167.323 |
| Average idle torque | T0 | Nm lbf.in | 1.20 - 1.50 11 - 13 | 1.85 - 2.35 16 - 21 | 6.00 - 6.90 53 - 61 | 16.00 - 16.10 142 - 142 |
| WGN 070 | WGN 090 | WGN 115 | WGN 142 | |||
|---|---|---|---|---|---|---|
| Cyclic torque | T2Z | Nm lbf.in | 22 - 45 195 - 398 | 40 - 90 354 - 797 | 75 - 160 664 - 1416 | 160 - 320 1416 - 2832 |
| Maximum torque | T2max | Nm lbf.in | 35 - 67 310 - 593 | 64 - 140 566 - 1239 | 120 - 255 1062 - 2257 | 255 - 510 2257 - 4514 |
| Continuous torque | T2D | Nm lbf.in | 19 - 32 164 - 283 | 34 - 42 301 - 372 | 63 - 105 558 - 929 | 136 - 240 1204 - 2124 |
| Emergency stop torque | T2Stop | Nm lbf.in | 75 - 100 664 - 885 | 150 - 200 1328 - 1770 | 300 - 400 2655 - 3540 | 700 - 800 6196 - 7081 |
| WGN 070 | WGN 090 | WGN 115 | WGN 142 | |||
|---|---|---|---|---|---|---|
| Continuous input speed | n1D | min-1 rpm | 1600 - 2250 1600 - 2250 | 1600 - 2150 1600 - 2150 | 1000 - 1350 1000 - 1350 | 850 - 1100 850 - 1100 |
| Max. mechanical input speed | n1max | min-1 rpm | 16000 16000 | 14000 14000 | 9500 9500 | 8000 8000 |
Wide diversity of output shafts
-
Hollow shaft for clamping system with shrink disc
-
Hollow output shaft on both sides
Lubrication
-
Standard lubrication
-
Food grade lubrication
Surface
-
Standard surface
-
Painted surface
Optimized clamping systems
-
Inertia-optimized clamping system
-
Clamping system for motor shaft diameter
Input
-
Motor adaptation
| WGN 070 | WGN 090 | WGN 115 | WGN 142 | |||
|---|---|---|---|---|---|---|
| Shaft diameter output | D3 | mm in | 18 0.709 | 24 0.945 | 36 1.417 | 50 1.969 |
| Centering diameter output | D5 | mm in | 60 2.362 | 70 2.756 | 90 3.543 | 130 5.118 |
| Hollow shaft diameter | D24 | mm in | 15 0.591 | 20 0.787 | 30 1.181 | 40 1.575 |
| Flange cross section output | Q1 | mm in | 70 2.756 | 80 3.150 | 110 4.331 | 142 5.591 |
| Total length | L1 | mm in | 122.5 4.823 | 143.5 5.650 | 178.0 7.008 | 217.0 8.543 |
| Shaft length output | L3 | mm in | 33 1.299 | 34.5 1.358 | 48 1.890 | 54 2.126 |
WGN Shrink Disc
The WGN shrink disc can be used to make a force-fit connection between your machine shaft and the right angle hollow shaft gearbox WGN.
WGN Shrink Disc
Downloads
Configure your WGN gearbox here
We have developed the Tec Data Finder (TDF) so that you can configure a WGN planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
WPSFN
WPLN
Custom gearboxes
Our experienced engineers always find the optimal solution for your application. No matter what the special requirements of your application, we can develop a custom made gearbox to match your needs.
PSN
PSFN
WPLHE
PLHE
WPLQE
PFHE
Haven't found what you are looking for?
Then use our intuitive tools! The right gearbox and the associated CAD data are just a few clicks away.
Find your gearbox with the Product Filter!
The Product Filter is brilliantly simple. Moreover, it leads you directly to the right solution. Try it out!
Tec Data Finder – Configure a gearbox easily
We have developed the Tec Data Finder (TDF) so that you can configure a planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
For professionals: the NCP
The Neugart Calculation Program, abbreviated NCP, is our calculation software for gearbox configuration. With it, you can put together the perfect gearbox-motor configuration. Directly, based on your application data.
Let's stay in touch
Subscribe to our newsletter
Be the first to know about new products, trade shows, training dates and stay up to date.
SubscribeSocial Media
