PFHE
Frame size
Go to Tec Data FinderUse our Tec Data Finder (TDF) to configure your gearbox and request a quote if necessary
The PFHE represents a financially attractive alternative for high-load applications in which high radial loads occur. The combination of special pre-stressed inclined roller bearings and a flange output shaft in accordance with ISO 9409-1 gives the PFHE a very high load capacity. Thanks to the radial shaft seal that is used, this gearbox achieves protection class IP65 at the output side and can therefore also withstand adverse usage conditions.
Features
- Economy Line
- Coaxial gearbox
- Spur gear
- Preloaded angular contact roller bearings
- Radial shaft seal
- Extra large round type output flange
- Very short gearbox
- Equidirectional rotation
- Planet carrier in disc design
Further Information
PFHE 064 | PFHE 090 | PFHE 110 | Stage | |||
---|---|---|---|---|---|---|
Ratios | 3, 4, 5, 7, 8, 10 3, 4, 5, 7, 8, 10 | 1 | ||||
9, 12, 15, 16, 20, 25, 32, 40, 64, 100 9, 12, 15, 16, 20, 25, 32, 40, 64, 100 | 2 | |||||
Efficiency at full load | η | % % | 97 97 | |||
Min. operating temperature / Max. operating temperature | Tmin / Tmax | °C °F | -25 / 90 -13 / 194 | |||
Protection class | IP65 IP65 | |||||
Standard backlash | jt | arcmin arcmin | <10 - <12 <10 - <12 | <7 - <9 <7 - <9 | <7 - <9 <7 - <9 | |
Torsional stiffness | cg | Nm /arcmin lbf.in/arcmin | 5.0 - 11.5 44 - 102 | 15.7 - 38.5 139 - 341 | 30.0 - 95.0 266 - 841 | |
Gearbox weight | mG | kg lbm | 1.1 - 1.4 2.5 - 3.2 | 3.1 - 3.8 6.8 - 8.4 | 6.0 - 8.1 13.3 - 17.8 | |
Running noise | Qg | dB(A) dB(A) | 60 60 | 62 62 | 65 65 |
PFHE 064 | PFHE 090 | PFHE 110 | |||
---|---|---|---|---|---|
Radial force for 20,000 h / Radial force for 30,000 h | Fr 20.000 h / Fr 30.000 h | N lbf | 2000 - 2300 450 - 517 | 3650 - 4100 821 - 922 | 4550 - 5150 1023 - 1158 |
Axial force for 20,000 h / Axial force for 30,000 h | Fa 20.000 h / Fa 30.000 h | N lbf | 2500 - 2850 562 - 641 | 4800 - 5450 1079 - 1225 | 5600 - 6450 1259 - 1450 |
Tilting moment for 20,000 h | MK 20.000 h | Nm lbf.in | 110 972 | 278 2462 | 407 3603 |
PFHE 064 | PFHE 090 | PFHE 110 | |||
---|---|---|---|---|---|
Mass moment of inertia | J | kgcm2 lbf.in.s210-4 | 0.064 - 0.224 0.566 - 1.983 | 0.356 - 1.170 3.151 - 10.355 | 1.377 - 3.658 12.187 - 32.376 |
PFHE 064 | PFHE 090 | PFHE 110 | Stage | |||
---|---|---|---|---|---|---|
Nominal output torque | T2N | Nm lbf.in | 15 - 40 133 - 354 | 38 - 115 336 - 1018 | 95 - 195 841 - 1726 | 1 |
15 - 44 133 - 389 | 38 - 130 336 - 1151 | 95 - 260 841 - 2301 | 2 | |||
Max. output torque | T2max | Nm lbf.in | 24 - 64 212 - 566 | 61 - 184 540 - 1629 | 152 - 312 1345 - 2761 | 1 |
24 - 70 212 - 620 | 61 - 208 540 - 1841 | 152 - 416 1345 - 3682 | 2 | |||
Emergency stop torque | T2Stop | Nm lbf.in | 66 - 88 584 - 779 | 178 - 240 1575 - 2124 | 340 - 520 3009 - 4602 | 1 |
80 - 88 708 - 779 | 190 - 260 1682 - 2301 | 380 - 520 3363 - 4602 | 2 |
PFHE 064 | PFHE 090 | PFHE 110 | |||
---|---|---|---|---|---|
Average thermal input speed at T2N and S1 | n1N | min-1 rpm | 2100 - 4500 2100 - 4500 | 1550 - 4000 1550 - 4000 | 1350 - 3500 1350 - 3500 |
Max. mechanical input speed | n1Limit | min-1 rpm | 7500 7500 | 7000 7000 | 6500 6500 |
Wide diversity of output shafts
- Flange output shaft (ISO 9409-1)
- Output shaft with mounted pinion
Lubrication
- Standard lubrication
- Food grade lubrication
- Low temperature lubrication
Optimized clamping systems
- Inertia-optimized clamping system
- Clamping system for motor shaft diameter
Mounted pinion
- PM1 - Pinion with helical teeth
- PM2 - Pinion with helical teeth
- PM2 - Pinion with straight teeth
PFHE 064 | PFHE 090 | PFHE 110 | Stage | |||
---|---|---|---|---|---|---|
Pitch circle diameter output shaft | D11 | mm in | 31.5 1.240 | 50 1.969 | 63 2.480 | |
Centering diameter output flange | D13 | mm in | 64 2.520 | 90 3.543 | 110 4.331 | |
Flange diameter output | D14 | mm in | 86 3.386 | 118 4.646 | 145 5.709 | |
Total length | L1 | mm in | 72.0 2.835 | 100.5 3.957 | 117.0 4.606 | 1 |
84.5 3.327 | 118.0 4.646 | 144.0 5.669 | 2 | |||
Output flange length | L13 | mm in | 19.5 0.768 | 30.0 1.181 | 29.0 1.142 |
Mounted pinion
The Neugart pinion is pre-mounted on the gearbox and secured with screws. This means that the compact unit consisting of the gearbox and the pinion can be quickly installed in the application, and less installation work is required.
MOUNTED PINIONDownloads
Configure your PFHE gearbox here
We have developed the Tec Data Finder (TDF) so that you can configure a PFHE planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
Haven't found what you are looking for?
Then use our intuitive tools! The right gearbox and the associated CAD data are just a few clicks away.
Find your gearbox with the Product Filter!
The Product Filter is brilliantly simple. Moreover, it leads you directly to the right solution. Try it out!
Tec Data Finder – Configure a gearbox easily
We have developed the Tec Data Finder (TDF) so that you can configure a planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
For professionals: the NCP
The Neugart Calculation Program, abbreviated NCP, is our calculation software for gearbox configuration. With it, you can put together the perfect gearbox-motor configuration. Directly, based on your application data.
Let's stay in touch
Subscribe to our newsletter
Be the first to know about new products, trade shows, training dates and stay up to date.
Subscribe