PLHE
Frame size
Go to Tec Data FinderUse our Tec Data Finder (TDF) to configure your gearbox and request a quote if necessary
The PLHE is our ideal combination of economy and precision gearboxes. The preloaded tapered roller bearings of this planetary gearbox guarantee high rigidity even under maximum load. The high-performance seal provides increased protection against dust and water spray.
Features
- Economy Line
- Coaxial gearbox
- Spur gear
- Preloaded tapered roller bearings
- Radial shaft seal
- Square type output flange
- Extra long centering collar
- Equidirectional rotation
- Planet carrier in disc design
Further Information
PLHE 060 | PLHE 080 | PLHE 120 | Stage | |||
---|---|---|---|---|---|---|
Ratios | 3, 4, 5, 7, 8, 10 3, 4, 5, 7, 8, 10 | 1 | ||||
9, 12, 15, 16, 20, 25, 32, 40, 64, 100 9, 12, 15, 16, 20, 25, 32, 40, 64, 100 | 2 | |||||
Efficiency at full load | η | % % | 96 - 97 96 - 97 | |||
Min. operating temperature / Max. operating temperature | Tmin / Tmax | °C °F | -25 / 90 -13 / 194 | |||
Protection class | IP65 IP65 | |||||
Standard backlash | jt | arcmin arcmin | <10 - <12 <10 - <12 | <7 - <9 <7 - <9 | <7 - <9 <7 - <9 | |
Torsional stiffness | cg | Nm /arcmin lbf.in/arcmin | 2.9 - 4.2 26 - 37 | 8.2 - 11.8 73 - 104 | 16.7 - 26.5 148 - 235 | |
Gearbox weight | mG | kg lbm | 1.6 - 1.8 3.4 - 3.9 | 3.0 - 3.6 6.7 - 7.9 | 7.0 - 9.0 15.5 - 19.8 | |
Running noise | Qg | dB(A) dB(A) | 58 58 | 60 60 | 65 65 |
PLHE 060 | PLHE 080 | PLHE 120 | |||
---|---|---|---|---|---|
Radial force for 20,000 h / Radial force for 30,000 h | Fr 20.000 h / Fr 30.000 h | N lbf | 3200 719 | 4800 - 5500 1079 - 1236 | 5400 - 6000 1214 - 1349 |
Axial force for 20,000 h / Axial force for 30,000 h | Fa 20.000 h / Fa 30.000 h | N lbf | 3900 - 4400 877 - 989 | 5700 - 6400 1281 - 1439 | 7000 - 8000 1574 - 1798 |
Tilting moment for 20,000 h | MK 20.000 h | Nm lbf.in | 191 1690 | 383 3393 | 488 4317 |
PLHE 060 | PLHE 080 | PLHE 120 | |||
---|---|---|---|---|---|
Mass moment of inertia | J | kgcm2 lbf.in.s210-4 | 0.064 - 0.178 0.566 - 1.575 | 0.357 - 0.775 3.160 - 6.859 | 1.378 - 2.486 12.196 - 22.003 |
PLHE 060 | PLHE 080 | PLHE 120 | Stage | |||
---|---|---|---|---|---|---|
Nominal output torque | T2N | Nm lbf.in | 15 - 40 133 - 354 | 38 - 115 336 - 1018 | 95 - 195 841 - 1726 | 1 |
15 - 44 133 - 389 | 38 - 130 336 - 1151 | 95 - 260 841 - 2301 | 2 | |||
Max. output torque | T2max | Nm lbf.in | 24 - 64 212 - 566 | 61 - 184 540 - 1629 | 152 - 312 1345 - 2761 | 1 |
24 - 70 212 - 620 | 61 - 208 540 - 1841 | 152 - 416 1345 - 3682 | 2 | |||
Emergency stop torque | T2Stop | Nm lbf.in | 66 - 88 584 - 779 | 178 - 240 1575 - 2124 | 340 - 520 3009 - 4602 | 1 |
80 - 88 708 - 779 | 190 - 260 1682 - 2301 | 380 - 520 3363 - 4602 | 2 |
PLHE 060 | PLHE 080 | PLHE 120 | |||
---|---|---|---|---|---|
Average thermal input speed at T2N and S1 | n1N | min-1 rpm | 2500 - 4500 2500 - 4500 | 1900 - 4000 1900 - 4000 | 1750 - 3500 1750 - 3500 |
Max. mechanical input speed | n1Limit | min-1 rpm | 13000 13000 | 7000 7000 | 6500 6500 |
Wide diversity of output shafts
- Output shaft with feather key
- Smooth output shaft
- Splined output shaft (DIN 5480)
- Output shaft with mounted pinion
Lubrication
- Standard lubrication
- Food grade lubrication
- Low temperature lubrication
Optimized clamping systems
- Inertia-optimized clamping system
- Clamping system for motor shaft diameter
Input
- Motor adaptation
- No motor adaptation – universal flange
Mounted pinion
- PK1 - Pinion with helical teeth
- PK1 - Pinion with straight teeth
PLHE 060 | PLHE 080 | PLHE 120 | Stage | |||
---|---|---|---|---|---|---|
Shaft diameter output | D3 | mm in | 16 0.630 | 22 0.866 | 32 1.260 | |
Centering diameter output | D5 | mm in | 60 2.362 | 70 2.756 | 90 3.543 | |
Housing diameter | D6 | mm in | 60 2.362 | 80 3.150 | 115 4.528 | |
Flange cross section output | Q1 | mm in | 70 2.756 | 80 3.150 | 110 4.331 | |
Total length | L1 | mm in | 127.0 5.000 | 159.0 6.260 | 199.5 7.854 | 1 |
139.5 5.492 | 177.0 6.969 | 227.0 8.937 | 2 | |||
Shaft length output | L3 | mm in | 48 1.890 | 56 2.205 | 88 3.465 |
Mounted pinion
The Neugart pinion is pre-mounted on the gearbox and secured with screws. This means that the compact unit consisting of the gearbox and the pinion can be quickly installed in the application, and less installation work is required.
MOUNTED PINIONDownloads
Configure your PLHE gearbox here
We have developed the Tec Data Finder (TDF) so that you can configure a PLHE planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
Haven't found what you are looking for?
Then use our intuitive tools! The right gearbox and the associated CAD data are just a few clicks away.
Find your gearbox with the Product Filter!
The Product Filter is brilliantly simple. Moreover, it leads you directly to the right solution. Try it out!
Tec Data Finder – Configure a gearbox easily
We have developed the Tec Data Finder (TDF) so that you can configure a planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
For professionals: the NCP
The Neugart Calculation Program, abbreviated NCP, is our calculation software for gearbox configuration. With it, you can put together the perfect gearbox-motor configuration. Directly, based on your application data.
Let's stay in touch
Subscribe to our newsletter
Be the first to know about new products, trade shows, training dates and stay up to date.
Subscribe