PLPE
Frame size
Go to Tec Data FinderUse our Tec Data Finder (TDF) to configure your gearbox and request a quote if necessary
Our PLPE combines the best features of the Economy series with a performance bonus: The optimized output bearing is designed for higher radial and axial forces. The compact outer contour of the PLPE also allows it to be used in limited spaces.
Features
- Economy Line
- Coaxial gearbox
- Spur gear
- Reinforced deep groove ball bearings
- Round type output flange
- Equidirectional rotation
- Planet carrier in disc design
Further Information
PLPE 050 | PLPE 070 | PLPE 090 | PLPE 120 | PLPE 155 | Stage | |||
---|---|---|---|---|---|---|---|---|
Ratios | 3, 4, 5, 7, 8, 10 3, 4, 5, 7, 8, 10 | 4, 5, 10 4, 5, 10 | 1 | |||||
9, 12, 15, 16, 20, 25, 32, 40, 64, 100 9, 12, 15, 16, 20, 25, 32, 40, 64, 100 | 16, 20, 25, 40, 50, 100 16, 20, 25, 40, 50, 100 | 2 | ||||||
Efficiency at full load | η | % % | 97 - 98 97 - 98 | |||||
Min. operating temperature / Max. operating temperature | Tmin / Tmax | °C °F | -25 / 90 -13 / 194 | |||||
Protection class | IP54 IP54 | |||||||
Standard backlash | jt | arcmin arcmin | <15 - <19 <15 - <19 | <10 - <12 <10 - <12 | <7 - <9 <7 - <9 | <7 - <9 <7 - <9 | <6 - <9 <6 - <9 | |
Torsional stiffness | cg | Nm /arcmin lbf.in/arcmin | 0.7 - 1.0 6 - 9 | 3.3 - 5.3 29 - 47 | 9.7 - 15.0 86 - 133 | 21.0 - 40.0 186 - 354 | 54.5 - 70.0 482 - 620 | |
Gearbox weight | mG | kg lbm | 0.6 - 0.8 1.3 - 1.8 | 1.4 - 1.9 3.1 - 4.1 | 3.3 - 4.1 7.2 - 8.9 | 7.6 - 9.8 16.7 - 21.6 | 16.7 - 22.3 36.7 - 49.2 | |
Running noise | Qg | dB(A) dB(A) | 58 58 | 58 58 | 60 60 | 65 65 | 70 70 |
PLPE 050 | PLPE 070 | PLPE 090 | PLPE 120 | PLPE 155 | |||
---|---|---|---|---|---|---|---|
Radial force for 20,000 h / Radial force for 30,000 h | Fr 20.000 h / Fr 30.000 h | N lbf | 700 - 800 157 - 180 | 900 - 1050 202 - 236 | 1700 - 1900 382 - 427 | 2150 - 2500 483 - 562 | 4600 - 5200 1034 - 1169 |
Axial force for 20,000 h / Axial force for 30,000 h | Fa 20.000 h / Fa 30.000 h | N lbf | 800 - 1000 180 - 225 | 1000 - 1350 225 - 303 | 1500 - 2000 337 - 450 | 3000 - 4000 674 - 899 | 6000 - 7000 1349 - 1574 |
Tilting moment for 20,000 h | MK 20.000 h | Nm lbf.in | 26 227 | 43 376 | 99 876 | 168 1482 | 497 4398 |
PLPE 050 | PLPE 070 | PLPE 090 | PLPE 120 | PLPE 155 | |||
---|---|---|---|---|---|---|---|
Mass moment of inertia | J | kgcm2 lbf.in.s210-4 | 0.014 - 0.030 0.124 - 0.266 | 0.064 - 0.174 0.566 - 1.540 | 0.356 - 0.789 3.151 - 6.983 | 1.376 - 2.764 12.179 - 24.463 | 4.759 - 7.611 42.121 - 67.363 |
PLPE 050 | PLPE 070 | PLPE 090 | PLPE 120 | PLPE 155 | Stage | |||
---|---|---|---|---|---|---|---|---|
Nominal output torque | T2N | Nm lbf.in | 5 - 15 44 - 133 | 15 - 33 133 - 292 | 38 - 90 336 - 797 | 95 - 172 841 - 1522 | 210 - 460 1859 - 4071 | 1 |
5 - 15 44 - 133 | 15 - 33 133 - 292 | 38 - 97 336 - 859 | 95 - 195 841 - 1726 | 210 - 460 1859 - 4071 | 2 | |||
Max. output torque | T2max | Nm lbf.in | 8 - 24 71 - 212 | 24 - 53 212 - 469 | 61 - 144 540 - 1275 | 152 - 275 1345 - 2434 | 336 - 736 2974 - 6514 | 1 |
8 - 24 71 - 212 | 24 - 53 212 - 469 | 61 - 155 540 - 1372 | 152 - 312 1345 - 2761 | 336 - 736 2974 - 6514 | 2 | |||
Emergency stop torque | T2Stop | Nm lbf.in | 23 - 36 199 - 319 | 66 - 88 584 - 779 | 178 - 240 1575 - 2124 | 340 - 520 3009 - 4602 | 420 - 920 3717 - 8143 | 1 |
27 - 40 239 - 354 | 80 - 88 708 - 779 | 190 - 260 1682 - 2301 | 380 - 520 3363 - 4602 | 420 - 920 3717 - 8143 | 2 |
PLPE 050 | PLPE 070 | PLPE 090 | PLPE 120 | PLPE 155 | |||
---|---|---|---|---|---|---|---|
Average thermal input speed at T2N and S1 | n1N | min-1 rpm | 5000 5000 | 3650 - 4500 3650 - 4500 | 2300 - 4000 2300 - 4000 | 2050 - 3500 2050 - 3500 | 1100 - 3000 1100 - 3000 |
Max. mechanical input speed | n1Limit | min-1 rpm | 18000 18000 | 13000 13000 | 7000 7000 | 6500 6500 | 5500 5500 |
Wide diversity of output shafts
- Output shaft with feather key
- Smooth output shaft
Lubrication
- Standard lubrication
- Food grade lubrication
- Low temperature lubrication
Optimized clamping systems
- Inertia-optimized clamping system
- Clamping system for motor shaft diameter
Input
- Motor adaptation
- No motor adaptation – universal flange
Mounted pinion
- PK1 - Pinion with helical teeth
- PK1 - Pinion with straight teeth
PLPE 050 | PLPE 070 | PLPE 090 | PLPE 120 | PLPE 155 | Stage | |||
---|---|---|---|---|---|---|---|---|
Shaft diameter output | D3 | mm in | 12 0.472 | 16 0.630 | 22 0.866 | 32 1.260 | 40 1.575 | |
Centering diameter output | D5 | mm in | 35 1.378 | 52 2.047 | 68 2.677 | 90 3.543 | 120 4.724 | |
Housing diameter | D6 | mm in | 50 1.969 | 70 2.756 | 90 3.543 | 120 4.724 | 155 6.102 | |
Total length | L1 | mm in | 94.0 3.701 | 111.0 4.370 | 147.0 5.787 | 192.0 7.559 | 275.5 10.846 | 1 |
106.5 4.193 | 124.0 4.882 | 165.0 6.496 | 219.5 8.642 | 320.0 12.598 | 2 | |||
Shaft length output | L3 | mm in | 24.5 0.965 | 36 1.417 | 46 1.811 | 68 2.677 | 97 3.819 |
Mounted pinion
The Neugart pinion is pre-mounted on the gearbox and secured with screws. This means that the compact unit consisting of the gearbox and the pinion can be quickly installed in the application, and less installation work is required.
MOUNTED PINIONDownloads
Configure your PLPE gearbox here
We have developed the Tec Data Finder (TDF) so that you can configure a PLPE planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
"Due to the excellent application advice, the high product quality and the optimally matched product range, we have been relying on Neugart and its gearboxes for years. In the case of our servo clinching machine, we could not have used a better planetary gearbox.“
B. Eng. (DH) Florian Unger | Head of Development | Eckold GmbH & Co. KG
Haven't found what you are looking for?
Then use our intuitive tools! The right gearbox and the associated CAD data are just a few clicks away.
Find your gearbox with the Product Filter!
The Product Filter is brilliantly simple. Moreover, it leads you directly to the right solution. Try it out!
Tec Data Finder – Configure a gearbox easily
We have developed the Tec Data Finder (TDF) so that you can configure a planetary gearbox for your needs with just a few clicks. The TDF will provide you with all relevant data, technical information and CAD models. Matched to your motor's flange, of course.
For professionals: the NCP
The Neugart Calculation Program, abbreviated NCP, is our calculation software for gearbox configuration. With it, you can put together the perfect gearbox-motor configuration. Directly, based on your application data.
Let's stay in touch
Subscribe to our newsletter
Be the first to know about new products, trade shows, training dates and stay up to date.
Subscribe